Products
Leading packing supplier in cement industry
Rotary Packer
Category:
Inquire
Detailed Content
Product Structure
|
Working PrincipleThe work of the rotary packer is mainly divided into two parts: first, the rotation drive of the packaging machine. After frequency conversion speed regulation, the main drive motor drives the packaging machine to rotate through the reducer, transmission gear set and main shaft. Second, the filling of cement bags. The cement to be packaged enters the rotary drum through the feeding device, and then enters the power head shell through each small silo. The drive motor drives the impeller in the shell to rotate at high speed through the pulley, so that the cement is thrown out under the action of centrifugal force, filled into the cement bags through the discharge nozzle and ash outlet, and finally dropped to the bag receiving conveyor at a fixed point for transmission. |
Advantages of Cement Packing Machines
High Efficiency Rapid packaging speeds significantly boost productivity and streamline operations.
Rational Design Features a centrally-located feed system, with electrical wiring conveniently arranged outside the rotating silo for safer and tidier setup.
Full Automation Achieves seamless automation—integrating filling, weighing, and bag dropping into one continuous, self-operated process.
User-Friendly Operation Low initial investment, compact footprint, and energy-efficient performance make it economical and easy to run.
Easy Maintenance Designed with minimal wear-prone parts and no hydraulic or pneumatic components, reducing upkeep efforts and costs.
Layout Drawing
CCSP is a leading one stop cement equipment supplier, and we offer different types of cement packing machines with high automation and high efficiency.
Technical Features
• Eccentric feeding - Avoids overheating and damage of the upper main shaft bearing.
• Concentric design at the bottom - Ensures the packaging machine rotates along the central axis.
• Double-gate cylinder - Simple structure, few wearing parts, flexible opening and closing, ensuring accurate measurement.
• Pneumatic upper gate structure - Tight sealing, no ash leakage, no gate jamming.
• New-type power head - Tight sealing, small speed ratio, fast ash discharge and stable performance.
• Large impeller - Hollow structure, large ash inlet space, made of wear-resistant alloy material.
• Tension sleeve pulley - Easy to install and disassemble.
• Microcomputer system - Controls measurement and weighing, and monitors the entire working cycle.
Technical Parameters (Single Unit)
|
Name |
Value |
|
Model |
BHYW-8Q |
|
Number of discharge nozzles |
8 Piece |
|
Conveyed material |
Powder (cement) |
|
Designed production capacity |
≤2400 Bags/hour |
|
Feeding method |
Eccentric feeding |
|
Discharging method |
Impeller drive |
|
Unloading method |
Pneumatic bag pushing |
|
Weighing mechanism type |
Microcomputer scale weighing |
|
Single bag weighing weight |
50 kg |
|
Average weight error of 10 consecutive bags from the same nozzle |
±0.15 kg |
|
Weight error of 98% of bags |
±0.3 kg |
|
Total weight range of 20 consecutive bags |
1000-1003 kg |
|
Outer diameter of discharge nozzle |
φ2450 mm |
|
Distance from discharge nozzle to platform surface |
1200 mm |
|
Maximum rotating diameter |
φ2450 mm |
|
Main drive speed regulation method |
Frequency conversion speed regulation |
|
Rotating speed regulation range |
0-6 r/min |
|
Rated rotating speed of the whole machine |
5 r/min |
|
Power supply |
AC 380V 3N 50Hz |
Installation of the Rotary Packer
1. The main machine of the packaging machine must be installed in a place with a solid foundation. The foundation should be free of vibration and have sufficient strength and bearing capacity. Embedded iron should be provided, and the installation plane should be horizontal. The power supply and air source should be easily accessible.
2. Determination of the central installation position of the packaging machine
First, determine the central position of the large dust collecting hopper based on the reserved hole center of the large dust collecting hopper, then take the central position of the large dust collecting hopper as the reference to determine the central installation position of the packaging machine and mark it.
3. The general installation sequence of the packaging machine is: install the large dust collecting hopper - install the lower centering device - install the lower support device - install the suspension beam and rotary drum. The installation sequence can also be determined according to the on-site situation.
Why Choose CCSP?
• CCSP is a professional cement equipment supplier, specializing in a full range of cement packing machines. Our equipment features high automation and high efficiency, with intelligent control, fast packing speeds and minimal material waste, meeting diverse production demands.
• We also provide one-stop support services, including pre-sales consulting, on-site installation and commissioning, regular maintenance, and timely spare parts supply, to ensure your production runs smoothly.
Site Installation
Key words:
Rotary Packer
automatic rotary packer
cement bag packing machine
automatic rotary packing machine
cement packing equipment
packing plant equipment
Online Message
If you have any questions, please leave a message or send an email to us, and we will reply to you as soon as possible.
Related Products
For any cement packing solution, submit the form below to get in touch!
Copyright©2026 All Rights Reserved of CCSP